Unwanted reactions result in the formation of hydrogen sulfide and ammonia, which poison catalysts. Nickel or manganese is sometimes added to the washcoat to limit hydrogen-sulfide emissions.[citation needed] Sulfur-free or low-sulfur fuels eliminate or minimize problems with hydrogen sulfide. It also boasts the ultimate in customization, including the optional 700+ horsepower Shelby GT S/C version.

Shelby also gives the truck some off-road chops by installing a BDS 3.0-inch lift kit, Fox 2.5-inch internal bypass dampers, and performance rear traction bars. The truck also sits on a set of 22-inch Shelby wheels wrapped in 35-inch all-terrain tires. The new 2024 Ford Shelby F-150 packs up to 785 hp, or more power than many supercars. That's with an available supercharger for the truck's 5.0-liter V-8. Buyers can also opt for a naturally aspirated version where the V-8 keeps its stock 400-hp rating.

There are subtle changes on the outside to let onlookers know that this is no ordinary F-150, such as a custom dual-intake hood, a custom front fascia and grille combo, and Shelby badging. For the interior, Shelby adds carbon-fiber trim, billet racing pedals, custom floor mats, and a serialized plaque. For lean-burn spark-ignition engines, an oxidation catalyst is used in the same manner as in a diesel engine. Emissions from lean burn spark ignition engines are very similar to emissions from a diesel compression ignition engine. Upon failure, a catalytic converter can be recycled into scrap.

Finished in Panther Black Metallic over Onyx and Red leather, the car is powered by a 6.2-liter V8 linked with a six-speed automatic transmission and a limited-slip differential. Purchased by its current owner in February 2022, this G8 GXP is now offered with a reproduction window sticker, service manuals, a car cover, the removed exhaust system, a spare set of wheels, and a Michigan title. A catalytic converter is an exhaust emission control device which converts toxic gases and pollutants in exhaust gas from an internal combustion engine into less-toxic pollutants by catalyzing a redox reaction. Catalytic converters are usually used with internal combustion engines fueled by gasoline or diesel, including lean-burn engines, and sometimes on kerosene heaters and stoves. Whether you’re accelerating up a highway on ramp or passing slower traffic, improved acceleration lets you get up to speed more quickly. Gain horsepower, increase torque, and give your truck a more aggressive exhaust note with a new exhaust system.

Another difference is with the material used in the cat-back exhaust system against that in stock exhaust systems. But the problem with a resonator is that it can cause restriction to the flow of the exhausts. In the end, this can end up lowering your vehicle’s performance. It is also more affordable and easier to install than other types of exhaust systems, including the cat-back exhaust system. Cat-back and axle-back exhaust systems are both aftermarket exhaust systems. A performance exhaust system, like the cat-back exhaust, allows for easy splitting into dual exhaust.

When it comes to improving your vehicle’s performance, you have two options. However, stainless still can be very expensive, as opposed to aluminized steel which is very affordable. It is also resistant to corrosion, just not to the level of stainless steel. Since there is no back pressure and the diameter is large enough, the engine will not use a lot of energy to push the exhausts out. While getting a cat-back performance exhaust system can be pricier initially, it can save on a lot of costs in the future. These exhaust pipes are usually wrapped in sound-absorbing materials, mostly fiberglass packing.

Shelby American is pushing the latest generation Shelby GT500SE supercar to new levels. As the first Carroll Shelby Signature Edition version for this model, the car delivers sizzling styling, razor sharp handling and an additional 40 horsepower. The 2024 Shelby Super Snake is the pinnacle of our performance cars based on Ford's next generation S650 Mustang sports car. Gases are pulled from the cylinder head by the exhaust manifold, at which point they are removed via the exhaust at the rear of the vehicle.

So listen up and checkout this MBRP Black Series 3" Dual Cat-Back Exhaust on a 2021 LT1 Camaro. This is the main path to completing your full exhaust upgrade. And when it's time to perform maintenance that required the removal of your exhaust system make sure that you use new gaskets if your existing gaskets have too much heat damage. And check out the rest of the exhaust options to fully protect and support your exhaust beyond your cat-back setup.

It is important to note, however, that going too large may cause a dip in performance when gases pile up and exit the system slower resulting in torque, rpm, and horsepower loss. After the emissions are channeled out from the cylinders by the exhaust manifold, they are deposited into different catalytic converters. The IE Catback Exhaust System for your Audi B9/B9.5 S4 incorporates our in-house engineered DroneTrap technology to deliver a truly aggressive exhaust note without any annoying drone or rasp. Engineered with cutting-edge design features, including mandrel-bent stainless steel, TIG welding, multi-point reinforcements, and oversized quad tips. A catback exhaust system is a type of aftermarket exhaust system that replaces the muffler and tailpipe of a vehicle. It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the...

Because the success of a catback exhaust system depends on various factors – like catalytic converter restrictions, engine power, etc. – there’s no easy way to calculate how much horsepower you stand to gain. If you have a restrictive exhaust, then a cat back exhaust could massively improve your car’s performance, and contrastingly, if your exhaust already flows well, then a cat-back won’t be much of an upgrade. In Colorado, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information.

Fine-tune your ride for the best performance and aesthetic today. Steeda offers the largest complete line of Ford-based parts and accessories for your build and is considered the largest privately owned Ford performance-based operation in the world. If you've been searching for the perfect place to purchase Ford automotive performance parts for your vehicle, then you're at the right place!

Our straight-through brushed-finished mufflers are configurable to your desire, smoothing the exhaust note to a deep growl, without adding restrictions, rasp or drone. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. A cast 3" to dual 2.5" rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system, while looking tidy from under the rear bumper. Finally, removable 4" polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle. In addition to high-quality materials and components, the design of each high-performance exhaust system allows for easy, bolt-on installation right out of the box. CORSA exhausts require no welding and can mount directly to your factory connections.

One issue is that the system can become clogged with dust and debris over time, causing reduced performance. This can be remedied by regularly cleaning the system with compressed air or a soft brush. Finally, it's always a good idea to check for leaks after installation.

The tech commented on the high quality of the exhaust and how well it fit. With the deepest and winningest racing heritage in the business, we have credibility thatwas earned one quarter mile at a time. Our friendly staff is experienced through product testing, research and development,and track competition.

And for early access to special offers on the products you love, add Banks Special Offers. In a world of companies making disparate parts, Banks engineers the entire engine, not just its components. The proof of Banks’ expertise is its list of national championships and world records as well as the biggest military engine contract of the century. Of all the possible options, the U.S. military chose the Banks D866T engine for its high performance and durability.

A spare set of 19″ Y-spoke alloy wheels is included in the sale, and they are shod with Bridgestone tires. The car is finished in Panther Black Metallic (80U) and features a GXP-specific front bumper cover and rear diffuser as well as a sunroof, fog lights, dual hood scoops, fender vents, and a rear spoiler. Imperfections are noted on the decklid and on a door and are also shown in the gallery. Our expansive inventory of Subaru performance parts ensures your vehicle not only performs at its peak but is also supported by our unparalleled customer service. At SubiSpeed, we understand that upgrading your Subaru is not just about selecting the right parts; it's about having a trusted partner every step of the way.

Considering cat-back exhausts replace more restrictions, they typically offer increased performance and noise compared to axle-back systems; however, they’re also more complicated to install…and more expensive. Every gear head is always looking to upgrade their car’s performance, sound, and look. One quick solution to all three of these aspects is a cat back exhaust system. A cat back exhaust is an exhaust system modification that increases airflow and look. "Cat back" refers to the parts of the exhaust system behind the catalytic converter (where the "cat" in the name comes from).

Next we have the option we refer to as the Cat-back system (sometimes also known as "with Front Pipe" exhaust). One of the most noticeable changes after installing a cat-back exhaust system is the sound. The exhaust note becomes deeper and more pronounced, giving your vehicle a more aggressive tone. The specific sound varies depending on the muffler and pipe design, allowing drivers to choose a system that matches their preference for loudness and pitch.

You also need to be careful when tightening the bolts on the cat back. Over-tightening can damage the system, so just make sure they're tight enough to hold everything in place. It's important to make sure that the cat back is properly aligned with the exhaust pipe. If it's not, you could end up with an inefficient or even dangerous exhaust system. Competitors often rely on generic silencers or gimmicks that claim to cut out drone without any real knowledge or development involved.

That means a full exhaust system is a one-way ticket to overtaking cars on the road with ease, fewer trips to the gas station and more power behind your acceleration for when you need it the most. Discover the true power a high-performance exhaust system can bring to your truck or car with CORSA PERFORMANCE. CORSA has remained a leader in aftermarket performance exhaust systems through advanced engineering and constant innovation for over 25 years. Each CORSA exhaust utilizes our patented Reflective Sound Cancellation® (RSC®) Technology and top-of-the-line materials for a truly aggressive sound without any annoying drone during cruise. Enhance your driving experience and see what sets us apart from the competition with a CORSA axle-back or cat-back exhaust system today. Adding a cat back exhaust system is a great way to increase horsepower and improve sound for your vehicle.

Noticeable gains will be noticed in the initial throttle response, with reduced turbo lag. Engine movement and exhaust weight are transferred into the exhaust hangers, which puts a lot of stress on the mount brackets. IE's catback system is manufactured with multi-point and boxed-in hanger mounts designed to stand the test of time. Drive confidently knowing your exhaust is securely mounted and protected against annoying rattles or breaks. All piping is constructed of mandrel-bent T304L stainless steel to offer superior corrosion resistance.

We want to make sure the part fits your specific vehicle so we need a little more information from you. You can find out by inspecting the emissions sticker that is located in your engine compartment.

A cat back exhaust system is one of the most popular aftermarket upgrades for performance-minded drivers. When deciding which type of exhaust system to choose, it is important to consider your needs and budget. If you are looking for maximum power and efficiency, a cat back exhaust may be the best option. However, if you are more concerned with cost and weight, a standard system may be a better choice. A cat back exhaust is one of the most popular upgrades for car enthusiasts.

As an added bonus, cat-back systems include all of the necessary parts to replace your existing exhaust. The only costs you need to worry about are the kit itself and installation. Installing one of our cat-back exhaust systems is one of the best upgrades you can do on your Ford Maverick. Cat-back exhaust refers to what's in "back" of the "cat," or catalytic converter. It refers to the components that run from the rear outlet of the catalytic converter all the way back to the exhaust tip.

But with so many options available, it's easy to get lost in the world of aftermarket exhaust systems. While some companies may try to lure customers with an attractive price tag or flashy branding, it's quality of performance, sound, and construction that truly sets a great brand like Invidia apart from the rest. Transform your vehicle with the Roush Performance F-150 Cat-back Exhaust System, an ideal replacement for your factory exhaust system. Crafted from robust, corrosion-resistant T-304 stainless steel, this system features high-flow mandrel bends to enhance exhaust flow efficiency. Experience the thrill of enhanced acoustics and performance with this premium upgrade for your F-150. Banks patented exhaust systems enhance power, fuel economy, and sound by removing all airflow restrictions.

Dual Magnaflow wide open mufflers with quad 3.5" exhaust tips, slightly louder and deeper than standard Borla. This upgrade option retains the large Borla resonator and replaces Borla mufflers with dual Magnaflow mufflers and quad tips. Borla is a great exhaust, but with this upgrade your back will look much better with the large aggressive oval quad tips and will sound better too! Cat-back exhaust systems refer to all of the components that exhaust gasses flow through after exiting the vehicle’s catalytic converter.

Not only do our products boost performance and optimize exhaust flow, but we also add a touch of personalization to your ride. Find the perfect performance exhaust system compatible with Ford, 2016 ram 2500 6.7 delete kit, Chevy/GMC, Jeep, and more. Our patented design outflows all other exhausts on the market. The CORSA Performance GT350 Active valve exhaust system allows the driver to flexibility of having one exhaust that produces both an Xtreme and a Sport sound level.

There is a range of muffler types you can choose from with a cat back exhaust system with most people opting for a glasspack or straight-through muffler. Both of these options are designed to work well within the system to reduce back pressure. Deciding to purchase a performance exhaust system for your car is no easy task.

When used in the context of aftermarket parts or performance upgrades, "cat-back" is used to indicate which section of the exhaust system the parts replace. Cat-back systems are available as both single- and dual-exhaust. All Thermal R&D exhausts are built right here in the USA out of the highest quality materials. Depending on these variables, installing a less restrictive exhaust on your Maverick can improve horsepower by about three to five percent. At Thermal R&D Performance, we have been producing and perfecting aftermarket exhausts for decades.

In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. The design of these systems often sees an increase in horsepower compared to the factory design of a vehicle. Because stock models try to minimise materials and maximise space, with horsepower as a lower priority.

The products of REMUS Innovation Forschungs- und Abgasanlagen Produktions GmbH („REMUS") are distributed worldwide. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition. Discover MagnaFlow's latest evolution in performance exhaust technology. Stainless steel is the most popular choice for cat backs because it is durable and has a deep, throaty sound. But if you're looking for something lighter weight, you can also find cat backs made out of titanium. So, when it comes time to choose the right cat back for your car, keep these three things in mind and you'll be sure to find the perfect fit.

From Overland Series to our all-new SPEQ Series, explore MagnaFlow's latest performance exhaust systems designed for the 2024 Toyota Tacoma. Aftermarket cat-back exhaust upgrades are a relatively simple way to increase your vehicle’s power. Typically these upgrades involve installing wider piping with fewer sharp or sudden bends as a way to reduce backpressure. Backpressure is pressure opposing the desired flow of exhaust gasses. The more you are able to reduce backpressure, the more efficient the system will be, and ultimately your horsepower will increase. Cat-back exhaust refers to any part of the exhaust system that’s behind the catalytic converter.

Walker is your one-stop exhaust shop, offering a full line of mufflers, pipes, hardware and accessories. Cat to Y pipe intersection showing after cat O2 sensor location. This qualifies as one of the STRANGEST stock exhaust parts I have seen. For some reason Toyota/Lexus decided to weld a straight section of 60mm pipe to the cat outlet flange, angle cut it, weld a 50mm pipe pipe that has its last couple of inches expanded to 60mm and match angle cut. Also note the O2 placement is in the 50mm sections of the Y pipe where the sensor tip takes up a good portion of the available flow area.

Everything you love about our MK7 Golf range has been re-engineered to suit MK7.5. Enjoy an unparalleled experience, power and sound output coupled with a seamless fit. Trucks are all about dependability and capability, which is why MagnaFlow engineers every one of our durable, corrosion resistant stainless-steel exhausts to last the lifetime of your vehicle. One of the things you would appreciate about the axle-back exhaust system is that it offers better sound improvement.

Most designs of the time therefore included secondary air injection, which injected air into the exhaust stream. This increased the available oxygen, allowing the catalyst to function as intended. Cat-back exhaust systems replace every component behind the catalytic converter, including most piping, mufflers, resonators, and tailpipes.

There are several factors to consider when selecting an exhaust system for your vehicle, including noise level, finish, price, style, and installation difficulty. As you move through the versions here, you’ll notice that the more complete the system, the more expensive it becomes. In exchange, you'll get more performance and sound benefit out of the system. To sweeten the pot, our exhausts come with significant savings once you start bundling multiple pieces together.

The time and money you spend are a big investment, and we want to help you make the best decision for your driving dreams. Typically, a cat-back exhaust system will increase your car’s horsepower by somewhere between 5 and 50 brake horsepower. This will vary greatly depending on the condition of your exhaust and engine, so you should ask your mechanic if getting a cat-back exhaust is the best way to improve the performance of your car.

Typically, this includes the pipe connecting the pipe from the catalytic converter to the muffler, the muffler, and the tailpipe or exhaust tips. Because these types of exhaust systems are installed after the emissions monitoring systems of a vehicle, they won’t impede its ability to measure emissions. However, you must be aware of your local noise regulations and adhere to them. With relatively short install times when using a high-quality system from MagnaFlow, exhaust modifications can yield the instant gratification of your ride sounding as fast as it looks. When you purchase an aftermarket exhaust system like a cat-back exhaust, you're in control of horsepower and sound output as pipe diameter and muffler type are in your hands.

The bolstered heated front seats and contoured rear bench are upholstered in Onyx and Red leather. Appointments include a Blaupunkt 11-speaker sound system, a CD stereo, cruise control, a leather-wrapped shift lever, and automatic climate control. Whether you're seeking Upgraded Turbochargers, Axle-Back exhaust systems, Coilovers, or SubiSpeed Headlights we have you covered. The truck is based on the F-150 Lariat 4x4 SuperCrew and Shelby plans to limit production to 800 examples for the 2024 model year. Pricing starts at $130,000 for the naturally aspirated version and $139,995 with the supercharger attached. The urea solution is also referred to as diesel exhaust fluid (DEF).

The difference in fuel economy is, however, more obvious while driving on a freeway. They also do not offer the best performance due to many reasons. If you're looking for an off-road exhaust with maximum clearance and an extremely&nbs.. Sign up for the IE mailing list and stay up to date on new products, sales, giveaways, and promotions.

The APR Catback Exhaust System personalizes your vehicle’s looks, sound and performance. You get the only the best with SPD's 3" resonator 2007 duramax delete kit pipes. These 304 Stainless Steel pipes are .. SPD's high performance stage 1 resonator cat-back pipe replaces your factory resonator pipe with a t..

We match the exit size to the size exhaust you ordered, so if you are ordering this after the fact, please include the exhaust size you have in your order. Replaces the OEM catalytic converter with a free flowing pipe. Completely straight through (no bottleneck), free flowing mini-muffler and pipe. Replaces the OEM catalytic converter with a 3" metal substrate core high-flow performance cat and our mini muffler. The metal core is our highest flowing cat available and it will reduce... Rae is a very small 1000sqft shop, run by a dedicated team of two. Our motto, "Quality over quantity," drives everything we do and ensures the highest standards in every order.

By running pipes from the catalytic converter to the muffler and from the muffler to the exhaust tip, cat back exhaust systems improve exhaust gas flow, providing small performance boosts. However, your performance gains may be limited if your catalytic converter restricts gas flow, as a catback exhaust system is installed ‘downstream’ of the converter. Header-back systems are increasingly rare, namely because of modern emissions systems. Since removing your vehicle’s factory emissions components is highly illegal, the previous two options are more common. However, header-back systems are still available for some older, pre-emissions applications. In these cases, header-back systems offer more performance and volume than cat-back or axle-back systems; however, they’re also the most expensive and the most challenging to install.

If you have modified your 4×4 with lifted, lowered, or air type suspension systems, you can opt for a specially designed cat-back system with more pipe curvature before the rear axle. This is necessary for off-roading as it allows a higher degree of wheel travel and greater clearance for reduced-height springs and airbag suspensions. The custom exhaust systems available let you pick from a selection of pipework that allows you to adjust the exhaust to suit your noise preference. Are you looking to boost the power and efficiency of your vehicle?

Each cat-back exhaust system is made from high quality components and assembly so you can get the performance you want at a price you can afford with the assurance you need. Please note Quad Tips are available with optional Carbon RR Racing Tips! (see photo of our new tips in the image library for this product)This is our signature full cat-back exhaust system for Lexus ISF.

At Thermal R&D Performance, we have been developing quality aftermarket exhaust systems for decades. The materials we use are generally an upgrade from OE metals, and we incorporate our True Helmholtz Technology to eliminate cabin drone. This eliminates unwanted sound without restricting airflow needed for improved performance. Some three-way catalytic converter systems have air injection systems with the air injected between the first (NOx reduction) and second (HC and CO oxidation) stages of the converter. As in two-way converters, this injected air provides oxygen for the oxidation reactions.

In layman’s terms, a catback exhaust system provides a smoother, more streamlined path for exhaust gases to exit your car, allowing your engine to work more efficiently. When catalytic converters were first introduced, most vehicles used carburetors that provided a relatively rich air-fuel ratio. Oxygen (O2) levels in the exhaust stream were therefore generally insufficient for the catalytic reaction to occur efficiently.

Make sure your Subaru, Nissan, Honda, or Toyota is outfitted with a top notch exhaust system from Racing Exhaust System. Some are ideal for normal vehicles while others are better for high-performance engines. Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967.

The remaining waves produce the deepened and enriched exhaust acoustics you love. Stillen offers a variety of exhaust systems for many vehicles, both foreign and domestic. The muffler is a glass filled, large chamber design that provides the optimal amount of exhaust velocity for the engine while producing a great low rumble sound - without any annoying buzzing, "racer" sound. The high clearance fitment dramatically reduces the risk of getting hung-up on obstacles when off-roading. We’ve been helping customers with performance upgrades since 2006, and have a staff full of people who can help answer your questions. Our customer service — from our low prices to our fast shipping — has earned us a reputation with a legion of fans.

There are loads of options, all offering different benefits, and the amount of research you do can quickly turn to frustration when you realise the minuscule differences between the many options. OE-quality exhaust products engineered for today's medium-duty and heavy-duty vehicles. The single 60mm is split into twin 50mm pipes to the twin silencers.

CORSA does not recommend or recognize purchases and installations on unspecified vehicles. ARK Performance is a leading manufacture that develops the best cat back exhaust systems, downpipes, test pipes, and hi-flow cats for all car enthusiasts. Using custom designed straight through mufflers for flow - without the noise level of a track car. From a company that’s as committed to your satisfaction as to sonic excellence. A catback exhaust system is a great way to improve the sound, performance, and emissions of your vehicle. If you are looking for a way to improve your vehicle, a catback exhaust system is a great option.

From the inception of the small block Cobra, Carroll Shelby intended to build a race version of his lightweight roadster; its ultimate iteration was the 289 FIA roadster. Special Edition Shelby F-150 Super Snake celebrates Carroll Shelby's passion for performance trucks. Shelby American is celebrating the 100th anniversary of Carroll Shelby's birth with a performance street truck to honor the ledged.

Catback exhaust systems are popular among car enthusiasts because they can improve the sound and performance of a vehicle. From classic American muscle cars to the newest off-road capable rigs, STILLEN has you covered. Browse our most popular performance car, truck and SUV exhaust systems to find the ultimate exhaust experience for your vehicle. If you’re looking to enhance the performance of your car, you may have heard the term "cat back exhaust" being thrown around and wondered what is a catback exhaust exactly.

Cat back exhaust systems are a great way to enhance the performance and look of your vehicle without having to take out a small loan. An average exhaust will start at around $300 and can go up to anywhere around $3000. You will be able to find a cat back exhaust system for just about every make and model of a vehicle, and they are easy to install, making them great for people who love a bit of DIY.

This style of clamp design is popular in high-end OE applications and is known for long-term reliability. You can change the look of your Jeep too, with everything from polished stainless steel to full black exhaust kits, you can pick just the right look for your jeep. Depending on the year of your Jeep you might even be able to get a single or dual exit exhaust. You can choose your favorite exhaust system from our three collections, the GRiP Exhaust, N-II Exhaust, or the DT-S Exhaust.

Brands like Invidia, Borla, and Agency Power offer a wide range of options, allowing you to customize the sound and performance to suit your preferences. Upgrade your Subaru WRX, STI, Forester, and Crosstrek with these cat back exhausts to unlock additional horsepower, torque, and an exhilarating driving experience. Catback exhaust systems are typically made up of a rear pipe, a resonator and a muffler, though they can also include a mid-pipe, x-pipe, h-pipe or y-pipe, depending on the make and model. Upgrade the sound and performance of your Toyota Supra, GR86, or Subaru BRZ with a high-quality cat back exhaust system from FTSpeed. Our cat back exhausts are engineered to enhance exhaust flow, resulting in improved horsepower, torque, and throttle response. With a deep and aggressive tone, these exhaust systems not only amplify the sporty character of your vehicle but also provide a captivating driving experience.

Combined with our five different tip options, we've got you covered. We’ve had decades of experience perfecting exhaust style and technology and have developed custom exhaust systems considered too ‘niche’ by competitors. Many exhaust manufacturers use 400 series stainless steel to reduce costs and pad their profits. Additionally, the Maverick systems by Thermal offer a range of upgraded tip options that owners can choose from or change over time. Getting an upgraded cat-back exhaust system for your truck can enhance your performance and produce a great sound. Then there’s poor fitment and the dreaded drone that all too often accompanies aftermarket exhausts.

Typically, that includes a mid-pipe, muffler, tailpipe and tips. Cat-backs generally yield increases in performance, due to the more efficient flow of exhaust through upgraded parts like larger diameter tubing and better flowing mufflers, as well as improved sound and reduced weight. For starters, the "cat" in catback exhaust system is short for "catalytic converter", a central part of your car’s emission control system, which cat back exhausts are fitted behind, hence the "back". This relatively simple mod helps to free up exhaust gas flow and improve the noise of your engine by swapping out part of your exhaust system with a specially designed car performance exhaust system. These three reactions occur most efficiently when the catalytic converter receives exhaust from an engine running slightly above the stoichiometric point. For gasoline combustion, this ratio is between 14.6 and 14.8 parts air to one part fuel, by weight.

They directly bolt on to where the original exhaust sits and do not require any further modification. Cat back exhaust systems come with exhaust pipes, muffler and exhaust tips, so you have everything you need to replace the exhaust. The cat back is the section of the exhaust that runs from the outlet of the catalytic converter to the exhaust tips. Exhaust systems that include this often feature a large pipe running from the converter to the muffler, with mandrel-bent turns and glasspacks for reduced back pressure. Your go-to spot for information on the exhaust system, as well as mufflers, catalytic converters, pipes and sensors.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

The first widespread introduction of catalytic converters was in the United States automobile market. The exhaust system is crucial to a car’s performance, especially the catalytic converter which can go bad if it’s overworked. A stock exhaust system strives to minimize the car’s materials while maximizing space. This means that the exhaust system’s performance can suffer, having to work harder with less horsepower.

If you've got questions about cat-back exhaust systems, pipe diameters, muffler type, or anything else, talk with our product specialists. All 1995 model year vehicles, and all 1992 model year or earlier vehicles. All model year vehicles that were manufactured with EPA or Federal emissions certification. Exhaust gases from the cylinders are collected in the exhaust system to prevent harmful fumes from entering the vehicle.

The difference is that the dual exhaust system has two exhaust systems on one vehicle. Meaning, when modifying your exhaust, never start from the front of your turbocharged vehicle with a downpipe or with headers on your naturally-aspirated platform, you will create a bottleneck in the flow. By starting with a cat-back first, your exhaust gases will flow more freely if the rest of your system is stock.

Adding Ford F-150 Cat-Back Exhaust system to your truck is a quick, relatively cheap and easy way to extract more performance. We offer a number of high-quality systems from excellent manufacturers, so you can rest assured that whatever choice you make will look and sound like it belongs on your F-150. The Flowmaster Outlaw catback system has dual black tips that exit on the side, adding an extra aggressive look to your vehicle. Or go with a Magnaflow system for a signature rumble that everyone loves. Aftermarket performance exhausts are exhaust systems meant to replace the stock exhaust and offer more power and better tone to your engine. All our products are made from 304L "Aircraft" Grade stainless steel.

Straight-through, or flow-through, mufflers have perforated baffles and packing material that provides a conservative level of sound absorption while still keeping sound output moderately loud. Glasspack mufflers perform similar to resonators due to their design and lack of sound-absorbing packing material, so they tend to be louder and higher pitched. For compression-ignition (i.e., diesel) engines, the most commonly used catalytic converter is the diesel oxidation catalyst (DOC). This catalyst converts particulate matter (PM), hydrocarbons, and carbon monoxide to carbon dioxide and water. These converters often operate at 90 percent efficiency, virtually eliminating diesel odor and helping reduce visible particulates. These catalysts are ineffective for NOx, so NOx emissions from diesel engines are controlled by exhaust gas recirculation (2016 egr delete kit).

This is a direct drop-in and can be installed at home or at the shop. That’s why we carry a wide lineup of sport exhaust systems, from individual pieces to full kits, made by some of the best manufacturers in the industry. We take exhaust so seriously that we also make our own branded exhaust systems in our own facility. We use 304 stainless steel for extra durability and life, and ensure every component is forged to fit your vehicle. Cat-back exhaust systems have more efficient gas flow, yielding increased engine performance, thanks to their larger exhaust tubes and mandrel bends. As a result, your car will be able to breathe better and produce more power.

They both improve your engine’s tone and give it that deep rumble loved by every motor enthusiast. Getting a cat-back exhaust system is definitely the more budget-friendly option. Other benefits of aluminized steel is they are lightweight and very workable.

The performance parts available at Steeda include lowering springs, wheel spacers, spark plugs, brake kits, and many more. Choose from our Ford automotive parts today so that you can keep your ride in great condition. When it comes to picking a cat back exhaust system, you will likely be choosing between stainless or aluminized steel. The majority of the performance systems are made from stainless steel which is favoured as they won’t oxidize and corrode over time like traditional steel can.

Once we receive and evaluate your OEM catalytic converter, refunds will be issued in the form of a MagnaFlow Visa® Prepaid Card valued up to $75. A Recycling for Refunds icon will appear in your cart to get the process started. Sign up for our newsletter to be the first to know about our latest products, offers and events at MagnaFlow.

The installation of a cat-back exhaust system is fairly easy, but this too depends on your vehicle’s make and model. But, compared to the alternative, they are the easiest way of improving your vehicle’s performance without breaking the bank. As a result, the engine gets to breathe better and so release more torque and horsepower.

As a result, the glass pack mufflers end up producing sounds that are more aggressive and louder than the straight-through muffler. This is a little bit different from most original exhaust systems. Today we’ll focus on the cat-back exhaust systems and what makes them stand out. There are the header-back, turbo-back, axle-back and cat-back systems.

The 2024 Roush Super Duty stands as a testament to Roush Performance's dedication to engineering excellence, blending raw power with refined style. Whether it's for work or play, the Roush Super Duty promises to deliver an unparalleled driving experience, making every journey memorable. If the above ten reasons to consider a cat back exhaust system have you thinking it may be right for your car then Sandgate Auto Electrics are the people to call. Your neighbours may disagree that this is a benefit, but as we’ve mentioned earlier, and depending on your muffler choice, your vehicle will have a lot more grunt. This may well be the area you need to do the most research into and the sound quality, and type, can range drastically per system. At Walker, it's more than peace of mind in knowing we lead the industry with unparalleled level of compliance.